|
CLM-900
TDR CABLE LENGTH METER.
Primarily
designed for cable
wholesalers and retailers, contractors, electricians, cable and alarm
installers
who need to measure the cable lengths, test for opens and shorts in
all types
of cable. This precision TDR (Time Domain Reflectometry) meter is
advanced
instrument capable of measuring cable lengths and finding distance to
an open
or a short using TDR. This offers exceptional features and arange
capability
normally associated with far more expensive instruments. FEATURES : • Automatic
output impedance
control, auto-range, auto-zero and auto sensitivity allows for closely
matching to a wide range of cables under test. Only V.O.P (Velocity of
propagation) settings required. • Measuring
capability of the V. O.
P. of a sample cable. • Internal
library of 39 standard
cables allows of quick and easy measurements of the length of the 39
standard
cable types. SPECIFICATION (at 23oC +5oC : < 85%
RH) : Range : Depends upon
the V.O.P. of the cable
under test - 12,000 ft (3.7 km) @
V.O.P. < 99.9% / 9,800 ft (3.0 km) @ V.O.P. <
80.0% /
8,000 ft (2.4 km) @ V.O.P. <
66.0% / 6,200 ft (1.9 km) @ V.O.P. < 50.0%. Accuracy : +[2% of reading
+ 20”(50cm)] < 300
ft (100m), +[2% of reading] > 300 ft(100m). Display : 20”(50cm). Dead Zone : 15 ft(5 m). |
|
|
180CB CABLE TRACER.
Amplifier Probe
(180 CB-A) : »
The Amplifier Probe is designed
to identify and trace wires or cables within a group without damaging
the
insulation. » Work with ay Tone Generator to
identify wires.
» Volume control for increased sensitivity and
adjustable to suit work
environement. » Recessed ON/OFF button prevents
battery drain.
» Power supply is an any 9V battery with a life of
Approximately 100
hours. » A plug receptacle is designed for
head set or
hand set. Tone Generator
(180 CB-G) : » Tone Generator is great tool for
locating and identifying cable pairs
or individual conductors. »
Besides providing tone
generator, tone generator serves as a continuity and polarity tester.
» Test results are displayed by a three colored led.
» MeetsEN55011 / EN61000-4-4 / EN61000-4-5 /
EN61000-4-6. |
|
CC-420
CURRENT CALIBRATOR.
Precision
meter for calibrating process devices and measuring process signals.
|
|
RHA-35 (35%) / RHA-75. (75%) RH HUMIDITY
CALIBRATOR
Precision
RH Calibration standard for the humidity instruments.
|
URANUS UR-4070 LCR METER 20 Ranges.
Protective holster. Display : 26mm(H), 1999(Max.) Capacitance :
200PF / 2nF / 200nF (+1.0%), 20mF / 200mF / 2000mF (+2.0%). Inductance :
2mH / 20mH / 200mH (+2.0%), 2H / 20H (+5.0%). Resistance : 20W (+0.5%),
200W / 2K W / 20K W / 200K W / 2M W (+0.2%), 20M W / 200M W (+5.0%).
hFE : 0~1000. Power source : 9V x 1. |
|
LCR 9063 POCKET LCR METER 13mm (0.5”)
3.½ Digit LCD Display.
Max. reading 1999. Sampling Time Approx. 0.4sec. Operating
Temp. 0oC to 50oC (32oF to 122oF). Operating
Humidity : Less than 80%RH. L (Inductance) - Range :
2mH/20mH/200mH/2H/20H. Resolution :
1uH/10uH/100uH/1mH/10mH. Test Frequency : 250Hz. C (Capacitance) - Range :
2nF/20nF/200nF/2uF/20uF/200Uf Resolution : 1pF/10pF/100pF/1nF/10nF
100nF. Test Frequency : 250Hz. R(Resistance) - Range : 200W/2KW/20KW/200KW/2000KW/20MW. |
|
|
TES
- 2330, LCR MULTIMETER 3.½ Digit with
autosign and function, sampling rate
2.5 Times / Sec. Measuring Range
Voltage 200mV-2-20-200 1000 VDC,
200mV-2-20-200/750VAC, Current 200
microA-2m-20m-200m-10A DC/AC, Resistance
200-2k-20k-200k-2m 20MW, Capacitance
2000pf 200nf-2-20-mF, Inductance
2m-20m-200m-20H, Frequency
2k-20k-200kHz, Temperature
150°C/392°F, Logic test,
Diode check, |
|
|
|
THERMOELECTRIC COOL
BOXES
• Capacity : 13.5
Litres / 4
Litres • Maximum
Cooling Performance :
20oC below Ambient
Temperature. • Warm to 65oC by set-point
thermostat. • Hot / Cold /
Off Switch, with Red /
Green
light, which indicates warming or cooling. • Power
consumption 48 Watts. • 6.5 ft.
Detachable power cord. • Convenient and easy to use. |
|
CEM CO-180 CARBON MONOXIDE METER
Display : 3½ Digit (1999 counts)
multifunction backlit LCD. Range :
0~1000 PPM. |
|
MOULDED CASE CIRCUIT BREAKER CHINA MAKE 3 Pole 600V AC/250V DC Mitsubishi NF-225C
----------------------------------------------------------------------------- Rating 63Amps NF-225C
----------------------------------------------------------------------------- Rating 73Amps NF-225C
----------------------------------------------------------------------------- Rating 100Amps NF-225C
-----------------------------------------------------------------------------
Rating 200Amps NF-225CTA -----------------------------------------------------------------------------
Rating 250Amps NF-400CTA -----------------------------------------------------------------------------
Rating 400Amps NF-500CTA ----------------------------------------------------------------------------- Rating 500Amps NF-600CTA -----------------------------------------------------------------------------
Rating 600Amps NF-800CS
----------------------------------------------------------------------------- Rating 800Amps |
|
|
MINIATURE CIRCUIT BREAKER
(Made in China) MCB (Miniature Circuit Breaker
C45N) -- do -- but 2 Pole / 3 Pole / 4 Pole and
Rated Voltage 400V / 415V. ISOLATOR
3 Pole 40A
&
ISOLATOR 4 Pole 40A / 63A
|
|
|
Model |
DZ47L
C45L 1 Pole 2 Line |
DZ47L
C45L 2 Pole 2 Line |
|
APPEARANCE and WIRING
DIAGRAM |
|
|
|
Rated Voltage |
220/240 |
|
|
Rated Current
adoptive C45 |
40Amp & 63Amp |
|
|
Leakage
motion Current (mA) |
30 (mA) |
|
|
Leakage dead
Current (mA) |
15(mA) |
|
|
EARTH
LEAKAGE & OVER LOAD CIRCUIT BREAKER (CHINA MAKE) GE-3 Rating 30
Amp. 3 pole, 220V AC. WMO-30 Rating
30 Amp. 2
Pole 240 V AC. Sensitivity 30 mA (overload). |
ELCB SIMILAR TO F & G CHINA MAKE TYPE FIN & NFIN
|
|
|
||
|
AMPS |
SENSITIVITY |
Available
In
2 Pole and 4 Pole |
||
|
25 A |
0.03A/0.1A |
|||
|
40 A |
0.03A/0.1A |
|||
|
63 A |
0.03A/0.1A |
|||
|
40 A |
30mA/300Ma |
|||
|
63 A |
30mA/300mA/100mA |
|||
|
|
|
|||
|
KEW-2608 Range ACA 6
/ 15 / 60 / 150 / 300A, ACV 150 / 300 / 600V, Resistance 1KW / 10KW. Frequency 50
/ 60Hz Conductor size f33mm Max. Tear Drop shaped Jaws for ease to use.
|
|
KEW-2805 Range AC
Current
6 / 20 / 60 / 200 / 600A, ACV : 15 / 300 / 600V Resistance :
0 - 2KW. Frequenccy 50 / 400Hz Conductor size f30mm Max.
|
|
KEW-2103 (SNAP-10)
Range ACA 10 / 30 / 100 / 300 / 1000A,
ACV : 150 / 200
/ 750V Resistance 2KW conductor size f60mm Max, Frequency 50 / 60Hz. |
BOSSTEK
MG26A Analog Clamp Meter
ACA : 3 / 15 /
60A +5%.
ACV : 300 / 600V +5%. Size : 120 x 70 x 35mm. BOSSTEK
MG27A Analog Clamp Meter
All same as
above
but with Resistance : 0 ~ 300W. BOSSTEK MG27 Analog Clamp Meter
with Bigger Scale
Current : 0 / 5
/ 50 / 250A. Voltage
: 0 - 300 - 600V Accuracy : 5%. Test Voltage :
2000V with Resistance
Measurement. |
|
|
|
MG-27A |
MG-27 |
|
– 170A TRUE RMS DIGITAL POWER
METER With ENERGY
Mearsusrment
3¾ Digit, 4000
Count Resolution, True
RMS Reading, Auto Ranging, True power, Apparent Power
and Reactive
Power,Range: AC to 750 kW/kVA/kVAR. Power Factor
(cosf) 0.3 Lead (or Cap) ..1..0.3 Lag (or Ind.) Energy (kWh /
kVAh / kVARh)
Integrator for Maximum 80hrs. Time Stamp for
the Energy Integrator.
Current Measurement to 1000A peak. Voltage
Measurement to 750V RMS.
MAX/MIN Records Mode. Data Hold. Auto
Power Off. |
|
PROTEK-307 AC / DC POWER CLAMP METER 3¾ Digit LCD,
MAX
reading of 3999. Dual Integration Mode. Auto or Manual Ranging. Specification -
DCV
: (3 Ranges) 400mV / 4V / 600V Accuracy : +(0.5% rdg +3d). ACV : (4
Ranges) 4V
/ 40V / 400V / 600V, Accuracy : +(1.5% rdg + 5d). DCA / ACA : (2
Ranges)
400A / 1000A Accuracy : +(2.0% rdg + 5d). Resistance :
400W ~ 10MW Accuracy : +(2.0% rdg + 5d). Frequency :
100Hz ~
1MHz Accuracy : +(2.0% rdg + 2d). Power : 600kW. Apparent Power :
600kVA. Power Factor : 0.03~1. |
|
TM-1017 TRUE RMS CLAMP METER upto 400A, with Power / Harmonic measurements Clamp Jaws
opening
: Max. 30mm. Frequency with test leads and jaws upto 400Hz. Phase
sequence
with one wire. Active, Reactive, Apparent power and Energy on single /
Three
phase systems. Power Factor, cosj on Single / Three
Phase System. Specification -
DCV
: 600V Accuracy : +(1.0%+3). ACV : 600V Accuracy : +(5.0%
+
3dgt). ACV / DCV Peak
Measurement : 850V Accuracy : +(5.0% + 3dgt). ACA (TRMS) :
400A
Accuracy : +(5.0% + 3dgt). ACA Peak
Measurement : 800A Accuracy : +(5.0% + 10dgt). Resistance : 500W~2000W. Frequency (Test
Leads + Clamp Jaw) : 400Hz Accuracy : 1~15. Power Factor : 0.2~1.00. Voltage &
Current Harmonics : 1~15 / 16~25 Accuracy : +(10%rdg+5dgt). |
|
|
PC-6009 POWER CLAMP
METER low power.
*High watt
resolution : min 1 watt.
*Watt (AC, true, 2,000 / 10,000W) *ACA (200A, 600A), AC 600V, DC
200V, 2K ohms, diode.
*Size : 230x74x38mm. |
|
KEW-2012
Digital AC Power Clamp Meter
3½ Digit LCD display Range AC Current 20 / 200Arms, AC Voltage 200 / 600Vrms, AC Power 20 / 200KW Accuracy 1%, Conductor size 40mm Max., Frequency 40-400Hz. |
|
|
TES-3060
True Power Range 600KW,
Apprarent power measurement,
Range 600KVA, Power Factor measurement cosf range : 0.3
cap ~ 0.3 ind, 72.50 cap~0~72.50 ind, DCAmp
1000A,
ACA (True RMS) 1000 Amp Crest factor :< 5, Peak
indication 1000A peak detect acquisitions time < 100ms, DCV /
ACV (True RMS) 600V, Resistance 10KW, Frequency 300KHz,
Audible continuity and Fdiode check. Description of
Parts & Control : a. Transformer
jaws. b.
Jaw
opening trigger.
c. Data hold
button. d. PF
measurements. e. Maintenance
warning. f.
Range sector. g. DC
Voltage measurement. h. Minimum &
maximum recording button. i.
Press “” to seclect DC mode or Ac mode or
Hz mode. |
|
|
LB-5 REVLOUTION COUNTER
Milkyway, Taiwan
Make, 5 Digits with reset. STROKE COUNTER NE
make, 5 Digits with reset. MW-06
IMPULSE COUNTER Milkyway, Taiwan make, 6 Digits
with RESET, 220V AC, 12V/24V DC. |
|
Model |
HD-48J |
DHC-7J
|
DHC-8J |
|
APPEARANCE |
|
|
|
|
DIMENSION |
48(H) x 48(W) x
105(D)mm |
48(H) x 48(W) x
95(D)mm |
72(H) x 72(W) x
110(D)mm |
|
Counting
Range |
1 ~
9999 (x1, x10, x100) |
999999 |
|
Counting
Speed
|
30 cps |
30/500 cps |
|
|
Contact
output |
(1NO/1NC) |
1c |
2c |
|
Sold-state output |
3A 250 VAC resistive load |
(3A 250VAC Resistive Load) |
|
|
Power
for Sensor |
12VDC, 30mA |
DC 12V 30mA (Max.) |
|
Control
function
|
UP |
UP / Down / UP, Down, A, B, C |
|
Output mode
|
-- |
N, F, C, R (C, R mode shout-output time delay canbe set from 0.01s~9.99s) |
|
DISPLAY
|
4
Digit, 0.3 inch LED |
4 Digit, 0.3 inch LED |
|
Memory
backup
|
By applying +6VDC external battery on terminal
6 & 7 |
10 years |
|
Reset system
|
On front panel and Via terminals at the rear |
Power-OFF reset, External reset, Manual reset |
|
MODEL
|
DHC-1J-A1PR /
DHC-1J-A2PR / DHC-1J-ATR |
DHC-2J-A2PR /
DHC-2J-ATR |
|
|
APPEARANCE |
|
|
|
|
Counting
Range |
999999 |
||
|
Counting
Speed |
30/3K cps |
||
|
Power
supply |
AC 110~240V 50/60Hz |
||
|
Contact output |
A1PR
|
1a 1b |
|
|
A2PR |
1c |
2c |
|
|
ATR |
1c, 1 Batch |
1c, 1 Batch |
|
|
Sold-state
output |
(3A 250VAC
Resistive Load) or (NPN Open collector DC30V 100mA) |
(2A 250VAC
Resistive Load) or (NPN Open collector DC30V 100mA) |
|
|
Power
for Sensor |
DC 12V 100mA |
||
|
Control
function |
UP / Down / A, B, C Pre-scale function (0.001~99.999) Decimal point adjustment. |
||
|
Output
mode |
N, F, C, R (C, R mode shout-output time delay can be set from 0.01s~9.99s) |
||
|
DISPLAY |
6 Digit, LCD with Backlight |
||
|
Memory
backup |
10 years (at 25oC) |
||
|
Reset
system |
On front panel and Via terminals at the rear |
Power-OFF reset, External reset, Manual reset |
|
MODEL
|
TOTALIZING
COUNTER (DHC-11J) |
Totalizing
Counter (DHC-3J) |
|
APPEARANCE |
|
|
|
Range |
999999 DHC DL = 4~30VDC Voltage Input AL = 100~240VAC Voltage Input |
3J - 6L
: 999999 (0~2VDC Input
> 4.7kW) DHC 3J
- 6VH : 999999
(4~30VDC Input) DHC 3J
- 6AL :
999999 (110~240V AC/DC) DHC 3J - 8L : 99999999 (0~2VDC Input > 4.7kW) |
|
Counting
Speed |
15cps |
L : 10cps H : 200cps |
|
Display
Digit |
LED (6 Digit) |
LCD (6 Digit) |
|
Power
Supply |
AC/DC 12~24V OR AC/DC 100~240V |
Not required (Driven by built-in Battery) |
|
Memory
Backup |
Yes |
6 years (at 25oC) |
|
PANEL CUT OUT |
22.2(H) x 45(W)mm |
22.2(H) x 45(W)mm |
|
DIMENSION |
46(H) x 56(W)mm |
24(H) x 48(W)mm / FRAME SIZE : 50(H) x 60(W)mm |
|
RS-232 : Cable for data
transmission Software
: Software for
Data Logging For Manometer,
Anemometer , Sound Level Meter, Lux
Meter, Data Logger, Dissolve Oxygen
Meter, Multimeter, Stroboscope, Moisture Meter, Infrared
Thermomeer |