Nunes Instruments

H

Home HUMIDITY + DEW POINT + TYPE 'K' THERMOMETER / HUMIDITY ADAPTOR & TRANSMITTER /

HUMIDITY DEW POINT + HUMIDITY STAT SENSOR & CONTROLLER / HYDROMETER BRIX /

HYGROMETER & THERMOMETER

 

HUMIDITY + DEW POINT + THERMOMETER

 DT-615 HUMIDITY AND TEMPERATURE METER

 

Humidity meter plus Air and K-type Thermocouple Thermometer.

Dual Super Large 3½ Digit (1999 counts) multifunction backlit LCD.

Temperature Range : -20oC ~ 1000.0oC (-4oF ~ 1832oF).

Resolution : 0.1o up to 200o, 1o over 200o. Basic Accuracy : +3.0%.

Humidity Range : 0%RH~100%. Resolution : 0.1%RH. Accuracy : +3.5%RH.

Dimension (HxWxD) : 150 x 72 x 35mm.

 


 

  DT-616CT HUMIDITY AND NON-CONTACT INFRARED THERMOMETER

 

Same as above but with Infrared Thermometer. Temp. Range : -50oC ~ 500.0oC (-58oF ~ 932oF). Basic Accuracy : +2.0%+2oC/4oF. Distance to Spot Ratio 8:1. Emissivity : Fixed at 0.95.


 AZ-8705 POCKET SIZE DEW Point HYGRO THERMOMETER

 

Wet Bulb, Self Calibration. RH : 0-100%RH. Temperature : -20~+50oC / +14~122oF.

Response time : 60Sec. typical. Dual Display Temp. & Humidity.

Auto Power Off. MAX / MIN memory.


 HD-3008 HUMIDITY + DEW POINT + TYPE ‘K’ THERMO METER

 

LCD 0.6” Display. HUMIDITY : 10%~95% RH. Resolution : 0.1% RH.

Accuracy (23 +5oC) : 70% RH  - + (3% reading + 1% RH),

after calibration : <70% RH - + 3% RH. Temprature : 0oC~50oC, 32oC~122oC.

Resolution : 0.1. Accuracy : +0.8oC ( +1.5oF).


HUMIDITY ADAPTOR & TRANSMITTER

 HA-701 HUMIDITY ADAPTER

 

Measuring Range 10-95% RH can be operated with digital Multimeter having

Measuring Range 200mV DC.


 HA-703 HUMIDITY TRANSMITTER

 

Humidity Controller, Indicator, Recorder and Data Logger. Range : 10%~95%RH.

Resolution : 0.1%RH. Output : 0~1V (10mV per 1%RH). Power DC 7V~15V.

Accuracy (23+5oC) : > 70%RH +(3%rdg+1%RH), after Calibration : <70%RH~+ 3%RH).


 AZ 3520 TEMP. / RH TRANSMITTER

 

Transmit both Temperature and Relative Humidity. Supply Voltage : 6-16VDC.

Humidity Range : 5-95%RH. Humidity Accuracy : +3%.

Humidity output voltage (Vh) : 10mV / %RH.0~IV, EX.0% RH = 0mV, 50% RH = 500mV.

Temperature Range : 0~65oC. Temperature Accuracy : +0.6oC

Temperature output Voltage (Vt) : 10mV / oC. EX 0oC - 0mV, 50oC = 500mV.


DEW POINT + HUMIDITY STAT, SENSOR & CONTROLLER

SY-DS-1 DEW SENSOR

 

Capable of detecting and / or forecasting dew condensation by the change of resistance of the sensor.

Features : • Smalle and Light. • High response and reliable.

• Dew detection high sensitivity and accuracy.

Application : VCR, Camcorder, Copier, Car, Defroster.

Specification : Rated Voltage DC 0.8V max. Operating Temperature 0~60oC.

Operating Humidity 0~100% RH.

Element Size 6 x 7 x 0.64 (W x L x T).

Resistance : 75% RH - 20KW max. at 25oC, 93% RH - 100KW max. 100% RH - 200KW max. at 60oC.


SY-HS-220 & SY-HS-230A HUMIDITY SENSOR.

SY-HS-220

SY-HS-230

Model

SY-HS-220

SY-HS-230A

Rated Voltage

DC 5.0V

Current Consumption

 < 3.0mA

Operating Temp. Range

0~60oC

Operating Humidity Range

30~90% RH

10~90% RH

Standard Output Range

DC 1,980mV (at25oC 60RH)

DC 2,040mV (at25oC 60RH)

Storable Temp. Range

-30oC~85oC

Storable Humidity Range

within 95%RH

Accuracy

+5% RH (at25oC 60RH)

Remarks

PCB unit containing thermistor or diode for Temp. Compensation

 

 

 

 

 

 


TW200 IR-B HUMIDITYSTAT (controller)

 

Measuring Range 10-80% RH, mini size, easy to mounting. High sensitive Element to sense the changes in humidity, can be used on humidifier equipment.


 RH-1 PROGRAMMABLE HUMIDITY CONTROLLER.

 

Microcontroler based design controller. It is having set point, Relay on time, Hysterisis and offset. Programming  of controller is through key pad at front panel. Relay on time can be programmed (Range 1~250sec). Hysterisis can be programmed (Range 1~9.9%) Relay will be on after humidity cross the set point and will be off again when humidity goes below to the set point : Offset can also be programmed (Range -9.9~9.9% default value 0) and can be used to adjust fixed offset to show the corrected value.

 

Features : • Bright Seven Segment LED Display. • Electronic Capacitance Polymer Film Sensor. • Microcontroller based design. • Hysterisis Offset and Relay on Time.
• Programmable Set Point. • Easy Programming through 4 keys. • Non-volatile memory.


HYGROMETER - THERMOMETER


ZWS89-6 ANALOG THERMOMETER and HYGROMETER

 

Temperature : -25oC ~ +45oC. Humidity : 0 ~ 100%RH. Diameter : 25cm. These Products have the features of advanced structure reliable performance, high accuracy and beautiful appearance. Widely applicable to industrial, Agricultural and civil use.


ZWS89-7 DIAL TYPE ANALOG THERMOMETER and HYGROMETER

 

Temperature : -10oC ~ +50oC. Humidity : 0 ~ 100%RH. Dial Diameter : 4 inch.


3301 HYGRO-THERMOMETER

 

Digital display shows Humidity  Temperature, Memory for Highest / Lowest Temp. and Humidity, Measuring Range - Temp : -15°C~50°C, Humidity : 25%RH~95%RH, 2-Button Operation for MAX / MIN and RESET, Features for wall hanging and table top standing purposes.


3302 HYGRO-THERMOMETER

 

Same as above with CLOCK. 4-Button Operation for MAX / MIN, RESET, HOUR and Minute.


IT-202 HYGROMETER & THERMOMETER with CLOCK


 288CTH BIG DISPLAY THERMO / HYGROMETER with CLOCK.

 

Environment comfort display : “COMFORT”, “WET”, “DRY”. Temperature Range : 0oC~+50oC (+32o~120oF). Temp. Accuracy : +1.0oC (+1.8oF). Temperature Resolving Power : 0.1oC (0.1oF). Humidity Range : 30% ~ 90% RH. Humidity Accuracy : +8% RH.  Battery : AAA 1.5V. Time / Temp / Humidity indicate. Temp. reading for oF & oC. MAX and MIN Temperature and Humidity Memory. Calendar Alarm Clock, announce hour and 12/24 hours system clock.