S
|
Home SATMETER
/ SMOKE ALARMS / SOLDER – DESOLDER
/ STOP WATCH / SWEEP FUNCTION GENERATOR
|
SM-01 SATMETER
Hand held portable satellite SIGNAL STRENGTH METER, Analog
type, to measure LNB Voltage 25VDC, Current 500mA, Buzzer for Acoustic Signal
Strength, Frequency : 900-2050MHz, LED indicate for Horizontale or Vertical
Polorisation, Built in NiCad rechargeable battery pack for powering LNB.
|
|
Model
|
LX98A-D |
HWG-2000 |
HWS-3000A |
HWS-3000B |
|
APPEARANCE |
|
|
|
|
Sensor Type
|
Photoelectric |
Dual Channel Ionization |
||
|
Operating
Voltage |
DC 9V |
AC 220V |
DC 9V |
|
|
Working
Temp. |
-5oC ~ 40oC |
-4oC ~ 40oC |
4oC ~ 38Oc |
4oC ~ 38oC |
|
Humidity
Range |
10% ~ 90% RH |
|||
|
Audio
Alarm |
85db (3m) |
|||
|
Alarming
point |
2% smoke |
|||
|
Output |
|
Relay, Potential free |
||
JIE LA HUA 936 SOLDERING STATIONTemperature Range ---------- 200oC~480oC (392oF~896oF) Soldering
Iron ---------- 907ESD Power Consumption ---------- 60W Heating
Element ---------- Ceramic Heater Output Voltage ---------- 24V
AC |
COSO CS-98 SOLDERING STATIONTemperature Range ------------------------------------- 200oC - 450oC (392oF - 842oF) Power Consumption ------------------------------------- 45W at 350oC Heating Element ------------------------------------- 98-H Ceramic Heater Soldering Iron ------------------------------------- CS98-I Standard Tip ------------------------------------- 900M-T-B COSO CS-88 DE-SOLDERING STATIONDe-soldering Iron ------------------------------------- JF88-G Power Consumption ------------------------------------- 45W at 350oC Heating Element ------------------------------------- 88-H Ceramic heater Temperature Range ------------------------------------- 200oC - 450oC (392oF - 842oF) Standard Tip ------------------------------------- 900M-T-B |
|
|
Power Rating : 140W. Line Volt. :
220VAC 50Hz. Temp. Setting Range (oC) : 180oC~430oC (356oF~806oF). Solder Bath Dimension (mm) : f36mm. Solder Bath Depth (mm) : 30mm. Melted Solder (KG) : 0.3kg. No-load (KG) : 0.6kg. External Dimensions (mm) : 160 x 90 x 80 mm. |
|
SLD-850 SMD REWORK STATION • For easy QFP desodering and
soldering. • Air volume and temperature
adjustable. • Electrostatic-proof design, very
safe to components. • One minute auto-cooling after power
off. • Various FP pickup and nozzles for
different kinds of IC (optional). Technical Specificaton : Station : 20W, diaphragm air pump,
capacity 23L/min (max.). Dimension : 187 x 135 x 245mm. Handle Unit : AC 110V
/ 220V, 250W, 100oC ~ 420oC hot air wire length 196mm. Replacement Parts : Various heating
elements, nozzles. |
|
|
T-113 ELECTRONIC MULTI TIMER AND STOP WATCH • 10 Digits display plus two extra digit for
weekday or mode display. • Normal Time : Hour, Minute, Second, Month, Day and
Weekday. • Selectable daily or schedule alarm (30 second
alarm). • Count-down timer with count-up function (max
range 23 : 59’59” and 30 second alarm). • Chronograph with split function (max range
23’59”59”). • Key-on tone. • Battery operated with 1.5V AAA
Battery. • Contemporary sporty housing design for hand
held and desktop. |
|
|
4 in 1 Sweep, Function and pulse Generator. Versatile wave forms
for Sine, Triangle, Ramp, Pulse, Sawtooth and DC Outputs. 0.02Hz-2 MHz Frequenc.
Output in7 Range. Built in 6 Digit Internal and External Counter Display
(10MHz). Internal and External linear Sweep Control from 1:1 to 100:1. Low distor tion for Sine
waveform less than 1% at 10Hz to 100kHz. Variable Symmetry for generating Saw
tooth and Pulse waveforms. TTL and CMOS leveled Square wave form output.
Variable DC Offset control. Variable Output level control with 20dB
Attenuator and Amplitude control. |
|
SL-4010 SOUND LEVEL METER
3.½ Digit 18mm (0.7”)
LCD. Range : 30 ~ 130 dB, 3 ranges. 1st
Range - 30 ~ 80dB, 2nd
Range -
50 ~ 100dB, 3rd Range - 80 ~ 130dB, 50dB
on each step, with over and under range indicating. Resolution : 0.1dB. Accuracy : 23 + 5oC.
Frequency : 31.5Hz ~ 8,000Hz. |
|
SL-4001 SOUND LEVEL METER
Display : 3.½ Digit 18mm (0.7”) LCD. Function : Db (A & C frequency
weighting), Time weighting (Fast, Slow), Max. hold, AC and DC output.
Measurement Range : 3 ranges, 35 ~ 130 dB (Typical 30dB ~ 130dB), input signal only. Resolution
: 0.1 dB. Accuracy : 23 + 5oC.
Frequency : 31.5Hz ~ 8,000Hz. |
|
SL-4011 SOUND LEVEL METER
Same as above with Complete carrying case and RS-232
Communication. |
|
SL-4013 SOUND LEVEL METER
Separate Sound Probe for Easy Operation. All same as SL-4010 but with 5 Digit LCD Display. RS-232 and Auto
Range. |
|
|
SL-4022 CLASS ‘A’ SOUND LEVEL METER
Measurement Ranges : 3 Ranges (30~70dB,
60~100dB, 90~130dB). |
|
|
Model |
AZ - 8921 |
AZ - 8925 |
AZ - 8928 |
APPEARANCE
|
|
|
|
|
Accuracy / Resolution |
+ 1.5 dB
/ 0.1 dB |
+ 2 dB /
0.1 dB |
|
|
A/C Weighting & Auto Power Off |
Yes |
||
|
Backlight |
No |
Yes |
No |
|
Power Check & Data
Hold |
Yes |
||
|
Hard Carrying Case |
Yes |
No |
|
|
Auto Range |
Yes |
No |
|
|
Digital Display & Tripod Mountable |
Yes |
||
|
Fast / Slow response |
Yes |
||
|
Max. Hold & Max. Min. Average |
Yes |
||
|
Range (min ~ max) |
30 dB ~
130dB |
40 dB ~
130dB |
|
CB-2050
ANALOG SOUND LEVEL METER. A & C Weighting
Fast and Slow
Response. Accuracy : +2dB@114dB. Standard : 0dB = 0.0002 mbar. Microphone : Electric Condenser
omnidirectional becoming slightly directional with increase in frequency. Distortion
: Less than 2% at 1KHz, 0.5-Volt. Switch Setting (Range of Measurement) :
60dB (50-66dB), 70dB (60-76dB), 80dB (70-86dB), 90dB (80-96dB), 100dB
(90-106dB), 110dB (100-116dB), 120dB (110-126dB). |
|
YF-20 ANALOG SOUND LEVEL METER Ranges : Low - 40 ~ 80dBA, Hi -
80~120dBA. Current : 5mA (Operating). Consumption : 14mA (BATT test). Size :
160 x 65 x 38mm. |
|
SC 941 SOUND CALIBRATOR
Sound Pressure
level : 94Db 0.8 dB, Frequency : 1000Hz + 5%. Calibration
available for the type of ½ inch Microphone. |
|
