3-3/4 Digits, Analogue Bargraph, LCD, Data Hold, MAX/MIN Record, 30mm Jaw Size, AC Voltage, AC Current, Resistance. Has Low Pass Filter to filter out noise. AC Current leakage testers measure the amount of current that flows through a ground conductor. They include a measuring device or probe that connects to a conductive point, a voltmeter that displays Root Mean Square (RMS) values, and a circuit with specific resistance and frequency characteristics. Current leakage testers are used during both normal and single-fault conditions in order to determine whether electrical devices pose a shock hazard. For medical devices and other specialized equipment, additional single-fault conditions may be required.
Clamp meters are ammeters that can measure current without the need to disconnect the wires where the measurement occurs. They provide information about current draw and current continuity in order to help users troubleshoot erratic loads and trends. Clamp meters have both positive and negative leads and feature extremely low internal resistance. They are connected in series with a circuit so that current flow passes through the meter. High Current Flow may indicate a short circuit, an unintentional ground, or a defective component. Low current flow may indicate high resistance or poor current flow within the circuit.
Auto Power Off
Max / Min recording with Data Hold
Clamp Jaw Size : 30mm
Display : 3-3/4 Digits 3999 Counts LCD with 40 Segment analog Bargraph
AC Voltage : 0 – 400V
Accuracy : ±1.5%
AC Current : 0 – 40m/400m/4A/40A/80A/100A
Accuracy : ±1.0%
Resistance : 40 – 400 Ohms
Accuracy : ±1.0%
Low Pass Filter for eliminating effect of High Frequency Noise.
MOBILE NO
CUSTOMER CARE NO
9020607000
info@nunesinstruments.com
info@instrumentationworld.com