Cement Testing Lab Equipments

Blaine Air Permeability Apparatus is used for determining the fineness of Portland Cement measures the specific surface area of fine materials in square centimeters per gram of test sample.

Civil Lab Equipment Briquette Moulds Single model Cement Testing for Casting of cement Briquettes for tensile strength test and it is a two part split mould made of gun metal.

A Cement Autoclave is used by cement manufacturing companies to determine soundness & expansion test of cement samples. This method helps the manufacturers to assess the quality, strength and uniformity of the various chemical compositions of cement specimens.

This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with four automatic sequences of mixing cycle, in compliance with: By operating automatically on changes of speed, stops and mixing sequences, outlined by acoustic signal,

Flow tables are used for determining consistency (flow) and for preparing mortars of standard consistency for testing. Flow is determined as a percent increase in the diameter of a conically molded mortar.

This very robust mixer is expressly designed for the efficient mixing of cement pastes and mortar, with four automatic sequences of mixing cycle, in compliance with: By operating automatically.....

Gillmore Needle Apparatus is used to determine initial and final set times of Portland cement, masonry cement, hydraulic hydrated lime, and certain mortars in accordance with ASTM C266 and other standards. The adjustable support has horizontal ...

Heat Of Hydration Apparatus with model is manufacturers as per the industry defined standards. Heat Of Hydration Apparatus are the commonly required in the laboratory.

VTECH India Jolting Apparatus with model 1020 is manufacturers as per the industry defined IS 1727 1967, IS 4031 1968, ASTM C 394, C 64 standards. Jolting Apparatus are the commonly required in the laboratory equipment. We are manufacturers and suppliers and exporters of Jolting Apparatus, India.

VTECH is the leading marsh funnel and measuring cup manufacturers in India. We have been serving the engineering and construction firms oriented towards real estate, infrastructure and other projects. We also serve the testing abs and educational institutions offering engineering

VTECH India offers prism mould three gang for judging the strength and stability of cement specimens of diversity. Our machine (Model VT 1021) has been developed as per the international standards. VTECH India Prism Mould Three Gang is used for the purpose of determining liner shrinkage of mortar cement.

Designed to find out specific gravities of semi liquids like mud and other liquids having densities in the range 0.8 to 2.5. It has a stainless steel bam calibrated specific gravities from 0.8 to 2.5. A stainless steel cup with lid and overflow vent is fitted on one side of the beam. A counter weights with cursor slides over the graduated scale. The beam has a knife-edge at centre which rests in a fulcrum fitted.....

Vibrating Machine is used for vibrating the mix in moulds at a frequency of 12,000 ± 400 cycles per minute. The vibrator is mounted over 4 coiled springs and the vibrations are developed by means of a revolving eccentric shaft. The centre of gravity of the vibrator, including the cube mould, is either at the centre of eccentric shaft or within 25mm below it.

One of the primary functions of a drilling fluid is to carry drilled solids from the well bore. These solids are a contaminant, and if left in the system, can lead to numerous problems. The offsite sand content kit determines the volume percent of sand-sized particles in the drilling fluid. Api defines sand-sized particles as any material larger than 74m (200-mesh) in size. The test can be performed on low solids fluids as well as on weighted fluids.

VTECH India Briquette Tensile Strength Tester Machine makes use of an accurate, friction free double lever system, and the load get applied through two pillar hydraulic load frame with load gauge fitted on front of load frame for observation of load. The capacity of the unit is 900kgs and the machine is switched on after the Briquette is fixed in the jaws.

Civil Lab Equipment Manufacture Standard Spatula with model is manufactures as per the industry defined IS 4031, 269, BS 12 standards. Standard Spatula are the commonly required in the laboratory. The spatula consists of a steel blade, of a special shape. A wooden handle is fixed to the stem of blade. The weight does not exceed 340 gms.

This is the core of the system. A continous discharge vacuum pump is complete self contained unit. The unit is mounted on a transportation truly 24 Sq. Meter freshly laid concrete can be Dewatered in one single operation with one set mat. The pump is powered by 7.5 HP 3 Phase Electric Motor.

Our company is widely appreciated in offering Vicat Needle Apparatus to the clients. Vicat Needle Apparatus is widely renowned for distinguished attributes such as compact design, light weight and long operational life. This product can be used ......