Electrical And Electronic Instruments

3-1/2 Digits, LCD, Zero Adjustment, up to 20mF Capacitance Measurement Capacitance meters are instruments that measure capacitance, the ability to store an electric charge. They are used to test, inspect and sort ceramic and other types of capacitors on production lines.

This Digital Hand Held instrument is used to measure Differential Pressure Manometer in the range of 0 – 5 PSI. It also measures in various units like inH2O, PSI, bar, mbar, kPa, inHg, mmHg, OZin2, ftH2O, cmH2O, kgcm2. It also has Data Hold, Auto Power Off and RS-232 PC Interface facility.

A controlled force supply (likewise referred to typically as a power supply) guarantees that the yield current remaining parts steady, regardless of whether the info changes, by changing over unregulated AC (exchanging current) to a consistent DC (direct current).

Ground resistance testers can be to take several different measurements, including grounding system resistance, insulation resistance, earth continuity, current leakage, and ground bond.

Digital ELCB Tester with Current Rating up to 500mA, Trip Test, Fault Trip Time, Self Powered, verifies wiring connection, 2000mS readout for testing latest ELCB. Model 2820 Elarth Leakage Tester, ELCB Tester is easy to use.

Ground resistance testers can be to take several different measurements, including grounding system resistance, insulation resistance, earth continuity, current leakage, and ground bond.

Digital ELCB Tester with Current Rating up to 500mA, Trip Test, Fault Trip Time, Self Powered, verifies wiring connection, 2000mS readout for testing latest ELCB.

Gauss Meter for both static and electromagnets, DC and AC (40-500Hz), determines N/S polarity of Static Magnets, measures intensity of magnetic Field in Gauss and Tesla both, measures up to 0~3000mT(milli Tesla)/0~30000G(Gauss).

16″ Gooseneck sensor, detects all CFC Refrigerants such as R-22, R-124, R-11 and R-12 etc. For installations and safety inspections, VTECH is a reliable source for gas leak detector models and combustible gas detectors.

40 Pin Digital IC Tester to test 54 / 74 series TTL and 4000 & 4500 series CMOS IC’s, tests more than 2000 kinds of devices. IC Tester tests most of the IC in DIP package. The list includes Operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A

Milliohm meters are capable of measuring very small resistances. Devices which use a four-wire Kelvin probe system pass a test current through the probe so that the voltage is sensed by the center pin. This test method eliminates contact resistance and minimizes the possibility of errors caused by the resistance of the leads.

3-3/4 Digits, Analogue Bargraph, LCD, Data Hold, MAX/MIN Record, 30mm Jaw Size, AC Voltage, AC Current, Resistance. Has Low Pass Filter to filter out noise. AC Current leakage testers measure the amount of current that flows through a ground conductor.

Logic Probe Cum Pulser for maximum input of 50MHz . The logic Probe is ideal for troubleshooting and analysis of logic circuits. It works as a level detector, a pulse detector, a pulse stretcher, and a pulse memory (model 610 & 610B only). It features includes. Circuit powered.b.

High Sensitive Metal Detector with a circular sensor, the detector vibrates and provides audible alarm on detecting metal.

Digital Moisture Meter for paper, wood and hardened material like plaster, concrete and mortar.

60,000 Counts Backlit LCD Display, With USB PC Interface, 1000 Internal Memory, Data Hold, Pass / Fail Function, Four Wire measurement, Testing Current of 10A, Battery and Mains Operated, Measures from 1uOhms to 6k.Ohms.

Digital Motor Checker with insulation resistance test of 1000V. MOTOR CHECKER ET 4P is a portable diagnostic tool for Electrical Engineer and is used for quick on-site checks of electric motor and other three-phase machines.

Analogue Million MegOhms Meter for test voltage of 100, 200, 300, 400 and 500V, measures up to 10 Million MegOhms. Million Megohm Meter is an ideal instrument for measuring high resistance and insulation.

100MHz Dual Channel Four Trace Cathode Ray Oscilloscope with 1:1 and 10:1 Probes. Oscilloscopes for Sale show an electronic signal in a pattern or waveform on a screen. As it is traced across the screen, the waveform creates a signature of the signal's characteristics.

Analogue Million MegOhms Meter for test voltage of 100, 200, 300, 400 and 500V, measures up to 10 Million MegOhms. Million Megohm Meter is an ideal instrument for measuring high resistance and insulation.

120MHz DDS Function generator, 320MSa/s sampling rate. Function generators, Signal Generators (also known as Function Signal Generators) and IC waveforms synthesizers

The Static Charge Meter is a non-contact, light weight digital instrument designed to measure static voltages on objects & surfaces. It features a large LCD display to indicate the magnitude and polarity of the electrostatic charge.

Electric Fault Detector, to be used with more than two identical windings like general motors and transformers. Portable, Compact, it is easy to carry. It operates eve on a 9V Battery

Digital Stroboscope, 50 to 40,000FPM, 230V Single Phase AC Operated. Stroboscopes are used for inspection and observation of moving parts by freezing or slowing down the action of a moving object.

34 Channel PC Based Logic Analyzer, with precision gripper, USB PC Interface cable and software . This Logic Analyser unit below has USB interfacing, with 36 Channels

Relay Test Set suitable for testing distance, over voltage relays etc., Variable three phase Voltage / Current and variable DC Voltage outputs.

4 Digits 3 Channel Digital Time Interval Meter for measuring in the range of 99.99mS, 999.9mS, 9.999S.

Transistor Tester for measuring hFe and Bias Currents of Bi and Tri. Junction Transistors. It can test 78 and 79 series three-terminal voltage regulator

Transformer Turns Ratio Set to measure ratio in the range of 0.800 to 2021 & for Phase Deviation Measurement.

The Phase Angle Meter is specifically designed for measurements on electrical power systems. It is capable of displaying the phase angle relationship between two power signals, which can be two currents, two voltages or any combination.

OXFORD Brand Wheatstone Bridge. Wheatstone Bridge 2768 is an instrument designed for measuring DC resistance from 0.1 Ω to 110 MΩ. This instrument is equipped with a galvanometer and a power source

Oxford Brand Kelvin Double bridge, with spot reflecting galvanometer, High Current DC power supply and wooden stand for specimen. A bridge is an electrical circuit that consists of three branches that are connected at a common point and the intermediate bridging which is present can be adjustable.